Veritas 5.0.1 Installation Guide HP-UX 11i v3 (5900-2464, September 2012)

The system reboots automatically after the installation is complete. You can monitor the installation
process for warnings and notes. For more information on installation, see the log file /var/adm/
sw/swagent.log.
Verifying Base-VxFS-501 Installation
Verify the Base-VxFS-501 installation on your system by entering the following command:
# swverify Base-VxFS-501
For more information on the supported options, see swverify (1M).
Installing HP OnlineJFS (B3929GB)
The HP OnlineJFS (B3929GB) license enables additional VxFS functionality not available with
Base-VxFS-501.
You can install HP OnlineJFS (B3929GB) either in the non-interactive or in the interactive mode.
Installing HP OnlineJFS (B3929GB) in Non-Interactive Mode
Enter swinstall command in non-interactive mode, as follows:
# swinstall -s <depot-path> B3929GB
For more information on the supported options, see swinstall (1M).
Installing HP OnlineJFS (B3929GB) in the Interactive Mode
To install HP OnlineJFS (B3929GB) in the interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -s <depot-path>
2. Mark the B3929GB bundle on the SD Install Window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Verifying HP OnlineJFS (B3929GB) Installation
Verify the installation of OnlineJFS (B3929GB) on your system by entering the following command:
# swverify B3929GB
Fore more information on the supported options, see swverify (1M).
Installing VxVM 5.0.1
VxVM 5.0.1 consists of the Base-VxVM-501 and Full VxVM (B9116DB) bundles. The following
sections discuss the installation of these bundles using the HP-UX SD commands.
NOTE: After installing VxVM 5.0.1, if there were any prior VxVM versions that had unbundled
Array Support Library (ASL) packages installed, the new unbundled ASL packages will not be
automatically installed with 5.0.1. You must download and install 5.0.1 unbundled ASLs separately
or swcopy VxVM 5.0.1 together with VxFS 5.0.1 and ASL packages into a single depot and
install the depot. The ASLs bundled together with the base product will be updated automatically.
For more information on ASLs, see the Hardware Compatibility List (HCL):
http://docs.hp.com/en/5992-4022/5992-4022.htm
Installing Base-VxVM-501
You can install Base-VxVM-501 either in the non-interactive mode or in the interactive mode.
28 Installing the Veritas 5.0.1 Products