Veritas 5.0.1 Installation Guide HP-UX 11i v3 (5900-2464, September 2012)

NOTE: Ensure that you select the complete Base-VxVM-501 bundle for installation while installing
Full-VxVM bundle B9116DB if your system already does not have Base-VxVM-501.
Also, verify that the bundles Base-VxVM-501, Base-VxFS-501, Base-VxTools-501 and B9116DB
are present on your system after installing B9116DB.
Installing Base-VxVM-501 in Non-Interactive Mode
Enter the swinstall command in non-interactive mode, as follows:
# swinstall -x autoreboot=true -s <depot-path> Base-VxVM-501
For more information on the supported options, see swinstall (1M).
NOTE: If you are installing VxFS 5.0.1 in a system that includes the HP-UX Data Center Operating
Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE) or HP-UX High
Availability Operating Environment (HA-OE), you must either include OnlineJFS 5.0.1 (B3929GB)
on the swinstall command line or remove OnlineJFS 5.0 (B3929FB) prior to installing VxFS 5.0.1.
The installation of VxVM also installs the VEA service and client packages. Installation of VxVM
5.0.1 picks up VxFS 5.0.1 as a corequisite.
Installing Base-VxVM-501 in the Interactive Mode
To install Base-VxVM-501 in the interactive mode, complete the following steps:
1. Enter the swinstall command in the interactive mode as follows:
# swintall -x autoreboot=true -s <depot-path>
For more information on the supported options, see swinstall (1M).
2. Mark the Base-VxVM-501 bundle on the SD Install Window.
NOTE: If you are installing VxFS 5.0.1 in a system that includes the HP-UX Data Center
Operating Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE) or
HP-UX High Availability Operating Environment (HA-OE), you must either mark OnlineJFS
5.0.1 (B3929GB) in the SD Install window or remove OnlineJFS 5.0 (B3929FB) prior to
installing VxFS 5.0.1.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Verifying the Base-VxVM-501 Installation
Verify the Base-VxVM-501 installation on your system by entering the following command:
# swverify Base-VxVM-501
For more information on the supported options, see swverify (1M).
Installing Full VxVM (B9116DB)
The Full VxVM (B9116DB) license enables additional VxVM functionality that are not available
with Base-VxVM-501.
You can install Full VxVM either in the non-interactive mode or in the interactive mode.
Installing Full VxVM in Non-Interactive mode
Enter the swinstall command in the non-interactive mode as follows:
# swinstall -x autoreboot=true -s <depot-path> B9116DB
For more information on the supported options, see swinstall (1M).
Installing VxVM 5.0.1 29