Veritas 5.0.1 Installation Guide HP-UX 11i v3 (5900-2464, September 2012)

1. Stop activity to all Storage Management for Oracle volumes. For example, stop any applications
such as databases that access the volumes and unmount any file systems that have been
created on the volumes.
2. If you have any external Array Policy Modules (APMs) installed, uninstall the APMs. The
following warning message displays during the operating system upgrade:
WARNING: The file '/usr/conf/mod/dmpXXX.1' does not contain valid
kernel code.
You can ignore this message because it does not affect the functionality of Storage Management
for Oracle.
3. Upgrade from HP-UX 11i v2 to the latest available HP-UX 11i v3 fusion release. This upgrade
will install Base-VxVM 5.0 by default.
For more information on upgrading to HP-UX 11i v3, see the HP-UX 11i v3 Installation and
Update Guide at: http://www.docs.hp.com.
All disk groups created using Storage Management for Oracle 5.0 on HP-UX 11i v2 would
be accessible.
4. If patches to HP-UX 11i v3 are required, apply the patches before upgrading the product.
5. Install Storage Management for Oracle 5.0.1 for HP-UX 11i v3:
swinstall -x autoreboot=true -s <depot-path> T2789DB
6. Configure Storage Management for Oracle 5.0.1 HP-UX 11i v3 using the installsf
-configure option. For more information on configuring your system after the installation,
see “Configuring Your System after the Installation” (page 35).
7. Disk groups created using VxVM 4.1 can be imported after upgrading to VxVM 5.0. However,
HP recommends that you upgrade the VxVM disk groups to the latest version. For information
on upgrading the VxVM cluster protocol version, see “Upgrading the VxVM Cluster Protocol
Version” (page 72). For information on upgrading VxVM disk group versions, see “Upgrading
VxVM Disk Group Versions” (page 72).
Upgrading from Storage Management for Oracle 5.0 on HP-UX 11i v2
to Storage Management for Oracle 5.0.1 on HP-UX 11i v3
This section discusses the procedure to upgrade Storage Management for Oracle 5.0 on HP-UX
11i v2 to Storage Management for Oracle 5.0.1 on HP-UX 11i v3.
As all disk group versions supported by Veritas Volume Manager 5.0 are also supported by Veritas
Volume Manager 5.0.1, disk groups created in Storage Management for Oracle 5.0 are accessible
by Storage Management for Oracle 5.0.1 after the upgrade. However, certain features in Storage
Management for Oracle 5.0.1 may require the latest disk group version. Therefore, HP recommends
that you upgrade the disk group.
NOTE:
• If the authentication service was not configured prior to the upgrade, it remains unconfigured
after the upgrade. The installation logs contain a message stating that vxatd is not started
because it was not configured. This is the expected behavior and you can ignore the log
message.
• If you are upgrading from HP-UX 11i v2 to HP-UX 11i v3 with older fusions (prior to HP-UX
11i v3 Update 3) as an intermediate step, disk groups created using VxVM 5.0 are not
accessible until you upgrade to Storage Management for Oracle 5.0.1.
Additionally, you must convert VxVM root volumes to LVM.
To upgrade from Storage Management for Oracle 5.0 on HP-UX 11i v2 to Storage Management
for Oracle 5.0.1 on HP-UX 11i v3, complete the following steps:
62 Upgrading Storage Management for Oracle from Previous Releases