Veritas 5.0.1 Installation Guide HP-UX 11i v3 (5900-2464, September 2012)

1. Display a list of all the volumes:
# vxprint -g <dg> -Ath
For more information on the supported options, seevxprint (1M).
2. Remove a named plex:
# vxplex -g <dg> -o rm disk <plex_name>
If the remaining plex has more than one sub-disk, enter the following sequence of commands
to consolidate the sub-disks into a single sub-disk:
# vxassist -g <dg> mirror volume layout=config
# vxplex -g <dg> -o rm disk <plex_name>
For more information on the supported options, see vxassist (1M) and vxplex (1M).
NOTE: The consolidation operation fails if you do not have sufficient space on a single sub-disk.
Shutting Down VxVM
To shut down VxVM, enter the following commands:
# vxdctl stop
For information on the supported options, see vxdctl (1M).
# vxiod -f set 0
For information on the supported options, see vxiod (1M).
Removing Full VxVM (B9116DB)
You must remove Full VxVM )B9116DB) before you can remove Base-VxVM or you must remove
them together.
To remove Full VxVM (B9116DB), enter the following command:
# swremove B9116DB
For information on the supported options, see swremove (1M).
Removing Base-VxVM-501
To remove Base-VxVM-501, enter the following command:
# swremove -x autoreboot=true Base-VxVM-501
For more information on the supported options, see swremove (1M).
Removing VxFS
This section discusses how to remove the HP Online JFS (B3929GB) and the Base-VxFS-501
products.
Removing HP OnlineJFS (B3929GB)
NOTE: You must remove HP OnlineJFS 5.0.1 before removing Base-VxFS-501, or you must
remove them together. Removing OnlineJFS 5.0.1 does not automatically remove Base-VxFS-501.
You must remove the HP OnlineJFS (B3929GB) license before attempting to remove the
Base-VxFS-501 bundle.
To remove HP OnlineJFS (B3929GB), enter the following command:
# swremove B3929GB
For more information on the supported options, see swremove (1M).
76 Removing Veritas 5.0.1 Products