Veritas 5.0.1 Installation Guide, HP-UX 11i v3, First Edition, November 2009

NOTE: If you are installing VxFS 5.0.1 in a system that contains the HP-UX Data Center
Operating Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE) or
HP-UX High Availability Operating Environment (HA-OE), you must either include OnlineJFS
5.0.1 (B3929GB) in the swinstall command line or remove OnlineJFS 5.0 (B3929FB) prior to
installing VxFS 5.0.1.
Installing Base-VxFS-501 in Interactive Mode
To install Base-VxFS-501 in interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -x autoreboot=true -s <depot-path>
For more information on the supported options, see swinstall (1M).
2. Mark the Base-VxFS-501 bundle in the SD Install window.
NOTE: If you are installing VxFS 5.0.1 in a system that includes the HP-UX Data Center
Operating Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE)
or HP-UX High Availability Operating Environment (HA-OE), you must either mark
OnlineJFS 5.0.1 (B3929GB) in the SD install dialog box or remove OnlineJFS 5.0 (B3929FB)
prior to installing VxFS 5.0.1.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
The system reboots automatically after the installation is complete. You can monitor the installation
process for warnings and notes. For more information on installation, see the log file /var/adm/
sw/swagent.log.
Verifying Base-VxFS-501 Installation
Verify the Base-VxFS-501 installation on your system by entering the following command:
# swverify Base-VxFS-501
For more information on the supported options, see swverify (1M).
Installing HP OnlineJFS (B3929GB)
The HP OnlineJFS (B3929GB) license enables additional VxFS functionality not available with
Base-VxFS-501.
You can install HP OnlineJFS (B3929GB) either in the non-interactive or in the interactive mode.
Installing HP OnlineJFS (B3929GB) in Non-Interactive Mode
Enter swinstall command in non-interactive mode, as follows:
# swinstall -s <depot-path> B3929GB
For more information on the supported options, see swinstall (1M).
Installing HP OnlineJFS (B3929GB) in the Interactive Mode
To install HP OnlineJFS (B3929GB) in the interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -s <depot-path>
2. Mark the B3929GB bundle on the SD Install Window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Installing VxFS 5.0.1 31