Veritas 5.0.1 Installation Guide, HP-UX 11i v3, First Edition, November 2009

Verifying HP OnlineJFS (B3929GB) Installation
Verify the installation of OnlineJFS (B3929GB) on your system by entering the following
command:
# swverify B3929GB
Fore more information on the supported options, see swverify (1M).
Installing VxVM 5.0.1
VxVM 5.0.1 consists of the Base-VxVM-501 and Full VxVM (B9116DB) bundles. The following
sections discuss the installation of these bundles using the HP-UX SD commands.
NOTE: After installing VxVM 5.0.1, if there were any prior VxVM versions that had unbundled
Array Support Library (ASL) packages installed, the new unbundled ASL packages will not be
automatically installed with 5.0.1. You must download and install 5.0.1 unbundled ASLs separately
or swcopy VxVM 5.0.1 together with VxFS 5.0.1 and ASL packages into a single depot and install
the depot. The ASLs bundled together with the base product will be updated automatically. For
more information on ASLs, see the Hardware Compatibility List (HCL):
http://www.docs.hp.com/en/5900-0354/5900-0354.htm
Installing Base-VxVM-501
You can install Base-VxVM-501 either in the non-interactive mode or in the interactive mode.
NOTE: Ensure that you select the complete Base-VxVM-501 bundle for installation while
installing Full-VxVM bundle B9116DB if your system already does not have Base-VxVM-501.
Also, verify that the bundles Base-VxVM-501, Base-VxFS-501, Base-VxTools-501 and B9116DB
are present on your system after installing B9116DB.
Installing Base-VxVM-501 in Non-Interactive Mode
Enter the swinstall command in non-interactive mode, as follows:
# swinstall -x autoreboot=true -s <depot-path> Base-VxVM-501
For more information on the supported options, see swinstall (1M).
NOTE: If you are installing VxFS 5.0.1 in a system that includes the HP-UX Data Center
Operating Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE) or
HP-UX High Availability Operating Environment (HA-OE), you must either include OnlineJFS
5.0.1 (B3929GB) on the swinstall command line or remove OnlineJFS 5.0 (B3929FB) prior to
installing VxFS 5.0.1.
The installation of VxVM also installs the VEA service and client packages. Installation of VxVM
5.0.1 picks up VxFS 5.0.1 as a corequisite.
Installing Base-VxVM-501 in the Interactive Mode
To install Base-VxVM-501 in the interactive mode, complete the following steps:
1. Enter the swinstall command in the interactive mode as follows:
# swintall -x autoreboot=true -s <depot-path>
For more information on the supported options, see swinstall (1M).
2. Mark the Base-VxVM-501 bundle on the SD Install Window.
32 Installing the Veritas 5.0.1 Products