Veritas 5.0.1 Installation Guide, HP-UX 11i v3, First Edition, November 2009

NOTE: Starting from the SMO 5.0.1 release, the SMO Premium bundle (T2790DB) is deprecated.
Installing CVM [B9117DB] on HP-UX 11i v3
To install CVM on HP-UX 11i v3, complete the following steps:
1. Use a clean ignited HP-UX 11i v3 system.
2. If the ignited system has Base-VxVM 4.1 already installed on it, do not clean the system
before installing 5.0.1 v3
3. Install Base-VxFS-501 , Base-VxTools-501, Base-VxVM-501, and VxFS-SDK-501 by following
the instructions discussed in the previous sections.
4. Install CVM [B9117DB] by entering the following command:
swinstall -x autoreboot=true -s <-depot_source> B9117DB
Cold-Installing VxVM 5.0.1 and VxFS 5.0.1 with HP-UX 11i v3
This section describes the process to cold-install a system with HP-UX 11i v3, VxVM 5.0.1, and
VxFS 5.0.1. A depot with the HP-UX 11i v3 Operating Environment (OE) and a depot with the
Veritas software are used for the installation. VxFS 4.1 is included on the HP-UX 11i v3 OE, and
VxVM 5.0.1 and VxFS 5.0.1 are distributed separately.
Preparing the Ignite-UX Server
To prepare the Ignite-UX server, complete the following steps:
1. Enter the swinstall command to install Ignite-UX version C.7.3.144 (available September,
2007) or later on an Ignite-UX server. You can confirm the Ignite software version by entering
the command swlist | grep –i ign, or by viewing the contents of the /opt/ignite/
Version file.
2. Create the configuration file for the HP-UX 11i v3 OE depot. If you want VxVM_5.0.1
DGV=140, which is compatible only with VxVM_5.0.1 software, either comment-out or delete
the vxvm_version=4.1 entry at the end of the OE configuration file.
3. To register the HP-UX 11i v3 OE depot, complete the following steps:
a. # cd /var/opt/ignite/data/Rel_B.11.31
b. # /opt/ignite/bin/make_config \
- s <depot_server>:<1131_OE_depot> \
-c <OE_config_filename>_cfg
c. Test the configuration file.
# /opt/ignite/bin/instl_adm –T –f <OE_config_filename>_cfg
4. Create the configuration file for the HP-UX 11i v3 Veritas VxVM/VxFS 5.0.1 depot:
a. # cd /var/opt/ignite/data/Rel_B.11.31
b. # /opt/ignite/bin/make_config \
- s <depot_server>:<1131_Vx*5.0.1_depot> \
-c <VX_config_filename>_cfg
c. Test the configuration file:
# /opt/ignite/bin/instl_adm –T –f <VX_config_filename>_cfg
34 Installing the Veritas 5.0.1 Products