Veritas 5.0.1 Installation Guide, HP-UX 11i v3, First Edition, November 2009

Removing Base-VxFS-501
To remove Base-VxFS-501, enter the following command:
# swremove -x autoreboot=true Base-VxFS-501
For more information on the supported options, see swremove (1M).
CAUTION: Do not remove the VRTSvlic package if there are any other Veritas products
running on your system.
NOTE: VxFS 4.1 is activated after the removal of Base-VxFS-501.
Removing CVM
To remove CVM, enter the following command:
# swremove -x autoreboot=true B9117DB
Removing the Veritas Enterprise Administrator (VEA) Client
You must remove the VEA client software from any system that you used to access the Veritas
software.
To remove the VEA client from an HP-UX system other than the server, complete the following
steps:
1. Stop the VEA Service:
# /opt/VRTS/bin/vxsvcctrl stop
2. Use the swremove command to remove the VEA client packages.
# swremove VRTSobgui VRTSat VRTSpbx VRTSicsco
To remove the VEA client from a Windows system, complete the following steps:
1. Log in as the database administrator.
2. Select Start > Settings > Control Panel.
3. Double-click Add/Remove Programs to display a list of installed products.
4. Select VeritasEnterpriseAdministrator from the list, and click the Remove button.
5. Click Yes when a dialog box appears asking you to confirm the removal.
80 Removing Veritas 5.0.1 Products