VERITAS File System 4.1 Administrator's Guide
Kernel Messages
Kernel Messages
Appendix B224
034 WARNING: msgcnt x: mesg 034: V-2-34: vx_resetlog - mount_point file
system can’t reset log
• Description
The kernel encountered an error while resetting the log ID on the file
system. This happens only if the super-block update or log write
encountered a device failure. The file system is disabled to preserve its
integrity.
• Action
Unmount the file system and use fsck to run a full structural check.
Check the console log for I/O errors. If the problem is a disk failure,
replace the disk before the file system is mounted for write access.
035 WARNING: msgcnt x: mesg 035: V-2-35: vx_inactive - mount_point file
system inactive of locked inode inumber
• Description
VOP_INACTIVE was called for an inode while the inode was being used.
This should never happen, but if it does, the file system is disabled.
• Action
Unmount the file system and use fsck to run a full structural check.
Report as a bug to your customer support organization.
036 WARNING: msgcnt x: mesg 036: V-2-36: vx_lctbad - mount_point file
system link count table lctnumber bad
• Description
Update to the link count table (LCT) failed.
For a Version 2 and above disk layout, the LCT contains the link count for
all the structural inodes. The VX_FULLFSCK flag is set in the
super-block. If the super-block can’t be written, the file system is disabled.
• Action
Unmount the file system and use fsck to run a full structural check.
Table B-1 (Continued)
Message
Number
Message and Definition