Veritas File System 5.1 SP1 Administrator"s Guide (5900-1499, April 2011)

To mount the file system
◆
Mount the file system:
# mount -F vxfs -o delaylog /dev/vx/dsk/fsvol/vol1 /mnt1
Editing the fstab file
You can edit the /etc/fstab file to mount a file system automatically at boot
time.
You must specify the following:
■ The special block device name to mount
■ The mount point
■ The file system type (vxfs)
■ The mount options
■ The backup frequency
■ Which fsck pass looks at the file system
Each entry must be on a single line.
See the fstab(4) manual page.
The following is a typical fstab file with the new file system on the last line:
# System /etc/fstab file. Static
# information about the file systems
# See fstab(4) and sam(1M) for further
# details on configuring devices.
/dev/vg00/lvol3 / vxfs delaylog 0 1
/dev/vg00/lvol1 /stand hfs defaults 0 1
/dev/vg00/lvol4 /tmp vxfs delaylog 0 2
/dev/vg00/lvol5 /home vxfs delaylog 0 2
/dev/vg00/lvol6 /opt vxfs delaylog 0 2
/dev/vg00/lvol7 /usr vxfs delaylog 0 2
/dev/vg00/lvol8 /var vxfs delaylog 0 2
/dev/vx/dsk/fsvol /mnt1 vxfs delaylog 0 2
Unmounting a file system
Use the umount command to unmount a currently mounted file system.
See the vxumount(1M) manual page.
135Quick Reference
Unmounting a file system