Veritas File System 5.1 SP1 Administrator"s Guide (5900-1499, April 2011)

Table B-1
Kernel messages (continued)
Message and DefinitionMessage Number
WARNING: msgcnt x: mesg 033: V-2-33: vx_check_badblock -
mount_point file system had an I/O error, setting VX_FULLFSCK
■ Description
When the disk driver encounters an I/O error, it sets a flag in the
super-block structure. If the flag is set, the kernel will set the
VX_FULLFSCK flag as a precautionary measure. Since no other
error has set the VX_FULLFSCK flag, the failure probably occurred
on a data block.
■ Action
Unmount the file system and use fsck to run a full structural
check. Check the console log for I/O errors. If the problem is a disk
failure, replace the disk before the file system is mounted for write
access.
033
WARNING: msgcnt x: mesg 034: V-2-34: vx_resetlog - mount_point
file system cannot reset log
■ Description
The kernel encountered an error while resetting the log ID on the
file system. This happens only if the super-block update or log
write encountered a device failure. The file system is disabled to
preserve its integrity.
■ Action
Unmount the file system and use fsck to run a full structural
check. Check the console log for I/O errors. If the problem is a disk
failure, replace the disk before the file system is mounted for write
access.
034
WARNING: msgcnt x: mesg 035: V-2-35: vx_inactive - mount_point
file system inactive of locked inode inumber
■ Description
VOP_INACTIVE was called for an inode while the inode was being
used. This should never happen, but if it does, the file system is
disabled.
■ Action
Unmount the file system and use fsck to run a full structural
check. Report as a bug to your customer support organization.
035
Diagnostic messages
Kernel messages
162