Veritas File System 5.1 SP1 Administrator"s Guide (5900-1499, April 2011)

Increase the size of the file system. If the file system size cannot be increased,
remove files to create sufficient space for new Storage Checkpoints. Monitor
capacity of the file system closely to ensure it does not run out of space.
See the fsadm_vxfs(1M) manual page.
V-2-71
NOTICE: msgcnt x: mesg 071: V-2-71: cleared data I/O error flag in mount_point
file system
Description:
The user data I/O error flag was reset when the file system was mounted. This
message indicates that a read or write error occurred while the file system was
previously mounted.
See Message Number 038.
Recommended action:
Informational only, no action required.
V-2-72
WARNING: msgcnt x: vxfs: mesg 072: could not failover for volume_name file
system
Description:
This message is specific to the cluster file system. The message indicates a problem
in a scenario where a node failure has occurred in the cluster and the newly
selected primary node encounters a failure.
Recommended action:
Save the system logs and core dump of the node along with the disk image
(metasave) and contact your customer support organization. The node can be
rebooted to join the cluster.
V-2-75
WARNING: msgcnt x: mesg 075: V-2-75: replay fsck failed for mount_point file
system
Description:
The log replay failed during a failover or while migrating the CFS primary-ship
to one of the secondary cluster nodes. The file system was disabled.
Recommended action:
Diagnostic messages
Dewey kernel messages
212