Veritas File System 5.1 SP1 Administrator"s Guide (5900-1499, April 2011)

File Change Log administrative interface
The FCL can be set up and tuned through the fcladm and vxtunefs VxFS
administrative commands.
See the fcladm(1M) and vxtunefs(1M) manual pages.
The FCL keywords for fcladm are as follows:
Disables the recording of the audit, open, close, and statistical
events after it has been set.
clear
Creates a regular file image of the FCL file that can be downloaded
to an off-host processing system. This file has a different format
than the FCL file.
dump
Activates the FCL on a mounted file system. VxFS 5.0 and later
releases support either FCL Versions 3 or 4. If no version is
specified, the default is Version 4. Use fcladm on to specify the
version.
on
Prints the contents of the FCL file starting from the specified
offset.
print
Restores the FCL file from the regular file image of the FCL file
created by the dump keyword.
restore
Removes the FCL file. You must first deactivate the FCL with the
off keyword, before you can remove the FCL file.
rm
Enables the recording of events specified by the 'eventlist' option.
See the fcladm(1M) manual page.
set
Writes the current state of the FCL to the standard output.state
Brings the FCL to a stable state by flushing the associated data of
an FCL recording interval.
sync
The FCL tunable parameters for vxtunefs are as follows:
83File Change Log
File Change Log administrative interface