Veritas Storage Foundation 5.1 SP1 for Oracle RAC Administrator"s Guide (5900-1512, April 2011)

VxVM error messages
Table B-3 contains VxVM error messages that are related to I/O fencing.
Table B-3
VxVM error messages for I/O fencing
ExplanationMessage
The vxfen driver is not configured. Follow
the instructions to set up these disks and
start I/O fencing. You can then clear the
faulted resources and bring the service
groups online.
vold_pgr_register(disk_path): failed to open
the vxfen device. Please make sure that the
vxfen driver is installed and configured.
Incompatible versions of VxVM and the
vxfen driver are installed on the system.
Install the proper version of SF Oracle RAC.
vold_pgr_register(disk_path): Probably
incompatible vxfen driver.
VXFEN driver error messages
Table B-4 contains VXFEN driver error messages. In addition to VXFEN driver
error messages, informational messages can also be displayed.
See “VXFEN driver informational message” on page 283.
See “Node ejection informational messages” on page 283.
Table B-4
VXFEN driver error messages
ExplanationMessage
This message appears when the vxfen driver
is unable to register with one of the
coordinator disks. The serial number of the
coordinator disk that failed is displayed.
Unable to register with coordinator disk with
serial number: xxxx
This message appears when the vxfen driver
is unable to register with a majority of the
coordinator disks. The problems with the
coordinator disks must be cleared before
fencing can be enabled.
This message is preceded with the message
"VXFEN: Unable to register with coordinator
disk with serial number xxxx."
Unable to register with a majority of the
coordinator disks. Dropping out of cluster.
Error messages
VxVM error messages
282