Veritas Storage Foundation 5.1 SP1 for Oracle RAC Administrator"s Guide (5900-1512, April 2011)

Note: The startup and shutdown of AMF, LLT, GAB, VxFEN, and VCS engine are
inter-dependent. For a clean startup or shutdown of VCS, you must either enable
or disable the startup and shutdown modes for all these modules.
Table 2-3 describes the start and stop variables for VCS.
Table 2-3
Start and stop environment variables for VCS
Definition and default valueEnvironment
variable
Startup mode for the AMF driver. By default, the AMF driver is
enabled to start up after a system reboot.
This environment variable is defined in the following file:
/etc/rc.config.d/amfconf
Default: 1
AMF_START
Shutdown mode for the AMF driver. By default, the AMF driver is
enabled to stop during a system shutdown.
This environment variable is defined in the following file:
/etc/rc.config.d/amfconf
Default: 1
AMF_STOP
Startup mode for LLT. By default, LLT is enabled to start up after
a system reboot.
This environment variable is defined in the following file:
/etc/rc.config.d/lltconf
Default: 1
LLT_START
Shutdown mode for LLT. By default, LLT is enabled to stop during
a system shutdown.
This environment variable is defined in the following file:
/etc/rc.config.d/lltconf
Default: 1
LLT_STOP
Startup mode for GAB. By default, GAB is enabled to start up after
a system reboot.
This environment variable is defined in the following file:
/etc/rc.config.d/gabconf
Default: 1
GAB_START
Administering SF Oracle RAC and its components
Administering VCS
94