Veritas Storage Foundation™ for Oracle 5.0.1 Administrator's Guide

Table 11-1
dbdst_admin command options (continued)
DescriptionOption
Interval for file sweeping for file relocation. Default
value is 1, which means one per day. If this value
is set to 0, all scheduled sweep tasks will become
unscheduled.
sweepinterval=
Time per day for the file sweep to take place. Times
are entered in 24-hour periods and should list hour:
minute. For example, 8:30 AM is represented as
08:30 and 10:00 PM is represented as 22:00. Default
value is 22:00.
sweeptime=
Interval in minutes for gathering file statistics.
Default value is 30, which represents every 30
minutes. If this value is set to 0, all scheduled tasks
will become unscheduled.
statinterval=
Number of days after which the file statistics in
the repository will be summarized and purged.
Default value is 30. It is recommended that you set
your purge interval sooner because you will not be
able to view any statistics until the first 30-day
interval is over, if you use the default.
purgeinterval=
Time per day for the file purge to take place. Times
are entered in 24-hour periods and should list hour:
minute. For example, 8:30 AM is represented as
08:30 and 8:00 PM is represented as 20:00. Default
value is 20:00.
purgetime=
Parameter that allows you to add a class to a
database. The information should be entered as
class:"description", where class represents the class
name and description is a string of up to 64
characters enclosed by double quotes used to
describe the class.
addclass=
Parameter that allows you to remove a class from
a database. Enter the class name as it appears in
the database.
rmclass=
Defines a chunksize in bytes for a specific storage
class to extent balance the files in this storage
class. The information should be entered as
classname: valid chunksize value. Valid chunksizes
are 128k, 256k, 512k or 1m bytes.
definechunk=
Using Database Dynamic Storage Tiering
Configuring Database Dynamic Storage Tiering
188