Veritas Storage Foundation™ for Oracle 5.0.1 Administrator's Guide

v data_vol fsgen ENABLED 4194304 - ACTIVE - -
pl data_vol-01 data_vol ENABLED 4194304 - ACTIVE - -
sd PRODdg03-01 data_vol-01 ENABLED 4194304 0 - - -
pl data_vol-02 data_vol ENABLED 4194304 - SNAPDONE - -
sd PRODdg02-01 data_vol-02 ENABLED 4194304 0 - - -
dc data_vol_dco data_vol - - - - - -
v data_vol_dcl gen ENABLED 560 - ACTIVE - -
pl data_vol_dcl-01 data_vol_dcl ENABLED 560 - ACTIVE - -
sd PRODdg01-01 data_vol_dcl-01 ENABLED 5600 - - - -
pl data_vol_dcl-02 data_vol_dcl DISABLED 560 - DCOSNP - -
sd PRODdg02-02 data_vol_dcl-02 ENABLED 5600 - - - -
Identify that the specified plex is in the SNAPDONE state. In this example, it is
data_vol-02.
The snapshot mirror is now ready to be used.
Upgrading existing volumes to use Veritas Volume Manager 5.0
You may have to upgrade a volume created using a version older than VxVM 5.0
so that it can take advantage of Database FlashSnap.
Note: The plexes of the DCO volume require persistent storage space on disk to
be available. To make room for the DCO plexes, you may need to add extra disks
to the disk group, or reconfigure existing volumes to free up space in the disk
group. Another way to add disk space is to use the disk group move feature to
bring in spare disks from a different disk group.
Existing snapshot volumes created by the vxassist command are not supported.
A combination of snapshot volumes created by vxassist and vxsnap are not
supported.
243Using Database FlashSnap for backup and off-host processing
Hosts and storage for Database FlashSnap