Veritas Storage Foundation™ for Oracle 5.0.1 Administrator's Guide

Checking the database configuration environment using
dbed_checkconfig
You can use the command to verify and report on the database environment from
the command line.
Before checking the configuration environment, the following conditions must
be met:
■ You must be logged on as the database administrator
(typically, the user ID oracle
Prerequisites
■ The dbed_checkconfig command is used to verify
various elements of the database environment. The
utility attempts to use certain basic rules on database
settings, file system and volume parameters and layout
options to verify how resilient and well configured a
configuration is. The information provided is valid for
the supplied database.
■ See the dbed_checkconfig(1M) manual page.
Usage notes
To check the database configuration environment
◆
Use the command as follows:
$ /opt/VRTS/bin/dbed_checkconfig-S FLAS11r1 -H $ORACLE_HOME
VRTSodm 5.0.31.5.%20090524 Veritas Oracle Disk Manager
Examining file system attributes.
All file systems are VxFS.
Examining Quick I/O settings.
0 files are configured to use Quick I/O files.
It appears that your system is ODM enabled.
0 Quick I/O files should be converted to regular
files to use ODM feature.
Examining Cached Quick I/O settings.
No file systems have Cached Quick I/O enabled.
Examining File System tunable settings.
Parameters for all VxFS file systems used by FLAS11r1.
Filesystem i/o parameters for /snap_data11r1
read_pref_io = 2097152
read_nstream = 1
read_unit_io = 2097152
Veritas Storage Foundation for Oracle Command Line Interface
About the command line interface
322