Veritas Storage Foundation™ for Oracle 5.0.1 Administrator's Guide

Table A-11
Oracle dbdst_admin command options (continued)
DescriptionOption
Time per day for the file sweep to take place. Times are
entered in 24-hour periods and should list hour: minute.
For example, 8:30 AM is represented as 08:30 and 10:00
PM is represented as 22:00. Default value is 22:00.
sweeptime=
Interval in minutes for gathering file statistics. Default
value is 30, which represents every 30 minutes. If this
value is set to 0, all scheduled tasks will become
unscheduled.
statinterval=
Number of days after which the file statistics in the
repository will be summarized and purged. Default value
is 30. It is recommended that you set your purge interval
sooner because you will not be able to view any statistics
until the first 30-day interval is over, if you use the
default.
purgeinterval=
Time per day for the file purge to take place. Times are
entered in 24-hour periods and should list hour: minute.
For example, 8:30 AM is represented as 08:30 and 8:00
PM is represented as 20:00. Default value is 20:00.
purgetime=
Parameter that allows you to add a class to a database.
The information should be entered as class:"description",
where class represents the class name and description
is a string of up to 64 characters enclosed by double
quotes used to describe the class.
addclass=
Parameter that allows you to remove a class from a
database. Enter the class name as it appears in the
database.
rmclass=
Defines a chunksize in bytes for a specific storage class
to extent balance the files in this storage class. The
information should be entered as classname: valid
chunksize value. Valid chunksizes are 128k, 256k, 512k
or 1m bytes.
definechunk=
379Veritas Storage Foundation for Oracle Command Line Interface
About the command line interface