VERITAS Volume Manager 3.5 Release Notes (August 2003)

VERITAS Volume Manager™ HP-UX 11i v2 Release Notes
VERITAS VxVM 3.5 Licenses
Chapter 1 21
Limitations of this Release
VERITAS Volume Manager 3.5 for HP-UX has the following limitations,
which will be removed in subsequent releases:
Only versions A.11.13 and A.11.14 of MC/ServiceGuard and
ServiceGuard OPS Edition for HP-UX 11i will work with VERITAS
Cluster Volume Manager 3.5 for HP-UX.
Only version A.11.13 and A.11.14 of MC/ServiceGuard for HP-UX 11i
will work with VERITAS Volume Manager 3.5 for HP-UX.
The VERITAS Volume Manager 3.5 for HP-UX now supports the HP
Process Resource Manager (PRM) product. An HP OS patch is
required to be able to gather statistics on disks managed by VxVM.
The patch number was not known at the time this document was
written. See Patches and Fixes in This Version for instructions on
finding the latest patches.
A disk monitor integrated with the EMS framework is not yet
available for disks being managed by VERITAS Volume Manager 3.5
for HP-UX.
You must use LVM to manage your cluster lock disk; you cannot use
VERITAS Volume Manager for HP-UX or VERITAS Cluster Volume
Manager 3.5 for HP-UX to manage a cluster lock disk with this
release.
The maximum number of nodes in a ServiceGuard cluster is 4 in this
release of VERITAS Cluster Volume Manager 3.5 for HP-UX.
HP is continually adding support for additional hardware and software.
Contact your HP Service Representative for information about
additional support or refer to the latest edition of these Release Notes on
http://docs.hp.com. Refer to Hardware Requirements later in this
document for the current list of platforms and peripherals that are
supported with VERITAS Volume Manager 3.5 for HP-UX.
Supported Migration Scenarios
The upgrade procedure allows you to retain your existing HP-UX 11.11
or HP-UX 11i VxVM configuration when migrating to VxVM 3.5 on
HP-UX 11i. After upgrading, you can resume using VxVM on the same
host with an upgraded operating system without running the vxinstall
procedure. Refer to the VERITAS Volume Manager 3.5 Installation
Guide for details