Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

10
To continue with the operation, enter y (or press Return) at the following
prompt:
The selected disks will be added to the disk group
disk group name with default disk names.
list of device names
Continue with operation? [y,n,q,?] (default: y) y
11
If you chose to tag the disks with a site in step 9, you are now prompted to
enter the site name that should be applied to the disks in each enclosure:
The following disk(s):
list of device names
belong to enclosure(s):
list of enclosure names
Enter site tag for disks on enclosure enclosure name
[<name>,q,?] site_name
12
If one or more disks already contains a file system, vxdiskadm asks if you are
sure that you want to destroy it. Enter y to confirm this:
The following disk device appears to contain a currently
unmounted file system.
list of enclosure names
Are you sure you want to destroy these file systems
[y,n,q,?] (default: n) y
vxdiskadm asks you to confirm that the devices are to be reinitialized before
proceeding:
Reinitialize these devices? [y,n,q,?] (default: n) y
VxVM INFO V-5-2-205 Initializing device device name.
13
You can now choose whether the disk is to be formatted as a CDS disk that is
portable between different operating systems, or as a non-portable
hpdisk-format disk:
Enter the desired format [cdsdisk,hpdisk,q,?]
(default: cdsdisk)
Enter the format that is appropriate for your needs. In most cases, this is the
default format, cdsdisk.
Administering disks
Adding a disk to VxVM
110