Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME
===============================================================
c2t1d0 ENABLED ACME 2 2 0 enc0
c2t1d1 ENABLED ACME 2 2 0 enc0
c2t1d2 ENABLED ACME 2 2 0 enc0
c2t1d3 ENABLED ACME 2 2 0 enc0
Use the dmpnodenameattribute with getdmpnode to display the DMP information
for a given DMP node.
# vxdmpadm getdmpnode dmpnodename=emc_clariion0_158
NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME
======================================================================
emc_clariion0_158 ENABLED EMC_CLARiiON 1 1 0 emc_clariion0
Displaying consolidated information about the DMP nodes
The vxdmpadm list dmpnode command displays the detail information of a DMP
node. The information includes the enclosure name, LUN serial number, port id
information, device attributes, etc.
The following command displays the consolidated information for all of the DMP
nodes in the system:
# vxdmpadm list dmpnode all
Use the enclosure attribute with list dmpnode to obtain a list of all DMP nodes
for the specified enclosure.
# vxdmpadm list dmpnode enclosure=enclosure name
For example, the following command displays the consolidated information for
all of the DMP nodes in the eva4k6k0 enclosure.
# vxdmpadm list dmpnode enclosure=eva4k6k0
dmpdev = c18t0d1
state = enabled
enclosure = eva4k6k0
cab-sno = 50001FE1500A8F00
asl = libvxhpalua.sl
vid = HP
pid = HSV200
array-name = EVA4K6K
array-type = ALUA
155Administering Dynamic Multipathing
Administering DMP using vxdmpadm