Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

■ Select the path failover mechanism.
■ Select the alternate path in the case of a path failure.
■ Put a path change into effect.
■ Respond to SCSI reservation or release requests.
DMP supplies default procedures for these functions when an array is registered.
An APM may modify some or all of the existing procedures that are provided by
DMP or by another version of the APM.
You can use the following command to display all the APMs that are configured
for a system:
# vxdmpadm listapm all
The output from this command includes the file name of each module, the
supported array type, the APM name, the APM version, and whether the module
is currently loaded and in use. To see detailed information for an individual module,
specify the module name as the argument to the command:
# vxdmpadm listapm module_name
To add and configure an APM, use the following command:
# vxdmpadm -a cfgapm module_name [attr1=value1 \
[attr2=value2 ...]]
The optional configuration attributes and their values are specific to the APM for
an array. Consult the documentation that is provided by the array vendor for
details.
Note: By default, DMP uses the most recent APM that is available. Specify the -u
option instead of the -a option if you want to force DMP to use an earlier version
of the APM. The current version of an APM is replaced only if it is not in use.
Specifying the -r option allows you to remove an APM that is not currently loaded:
# vxdmpadm -r cfgapm module_name
See the vxdmpadm(1M) manual page.
Administering Dynamic Multipathing
Administering DMP using vxdmpadm
192