Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Table 8-5
Supported relayout transformations for concatenated-mirror
volumes (continued)
From concat-mirrorRelayout to
No. Use vxassist convert after relayout to the striped-mirror
volume instead.
mirror-stripe
Yes.raid5
Yes. This relayout removes a mirror and adds striping. The stripe
width and number of columns may be defined.
stripe
Yes. The stripe width and number of columns may be defined.stripe-mirror
Table 8-6 shows the supported relayout transformations for RAID-5 volumes.
Table 8-6
Supported relayout transformations for mirrored-stripe volumes
From mirror-stripeRelayout to
Yes.concat
Yes.concat-mirror
No. Use vxassist convert after relayout to the concatenated-mirror
volume instead.
mirror-concat
No. Use vxassist convert after relayout to the striped-mirror
volume instead.
mirror-stripe
Yes. The stripe width and number of columns may be changed.raid5
Yes. The stripe width or number of columns must be changed.stripe
Yes. The stripe width or number of columns must be changed.
Otherwise, use vxassist convert.
stripe-mirror
Table 8-7 shows the supported relayout transformations for mirror-concatenated
volumes.
Table 8-7
Supported relayout transformations for mirrored-concatenated
volumes
From mirror-concatRelayout to
No. Remove the unwanted mirrors instead.concat
No. Use vxassist convert instead.concat-mirror
Administering volumes
Performing online relayout
342