Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

physical disks. Data is allocated alternately and evenly to the subdisks of a striped
plex.
The subdisks are grouped into “columns,” with each physical disk limited to one
column. Each column contains one or more subdisks and can be derived from one
or more physical disks. The number and sizes of subdisks per column can vary.
Additional subdisks can be added to columns, as necessary.
Warning: Striping a volume, or splitting a volume across multiple disks, increases
the chance that a disk failure will result in failure of that volume.
If five volumes are striped across the same five disks, then failure of any one of
the five disks will require that all five volumes be restored from a backup. If each
volume is on a separate disk, only one volume has to be restored. (As an alternative
to or in conjunction with striping, use mirroring or RAID-5 to substantially reduce
the chance that a single disk failure results in failure of a large number of volumes.)
Data is allocated in equal-sized stripe units that are interleaved between the
columns. Each stripe unit is a set of contiguous blocks on a disk. The default stripe
unit size is 64 kilobytes.
Figure 1-14 shows an example with three columns in a striped plex, six stripe
units, and data striped over the three columns.
41Understanding Veritas Volume Manager
Volume layouts in VxVM