Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

10
On the OHP host where the replica database is to be set up, use the following
command to import the snapshot volume’s disk group:
# vxdg import snapvoldg
11
The snapshot volume is initially disabled following the join. Use the following
commands on the OHP host to recover and restart the snapshot volume:
# vxrecover -g snapvoldg -m snapvol
# vxvol -g snapvoldg start snapvol
12
On the OHP host, check and mount the snapshot volume. The following are
sample commands for checking and mounting a file system:
# fsck -F vxfs /dev/vx/rdsk/snapvoldg/snapvol
# mount -F vxfs /dev/vx/dsk/snapvoldg/snapvol mount_point
13
On the OHP host, use the appropriate database commands to recover and
start the replica database for its decision support role.
At a later time, you can resynchronize the snapshot volume’ s data with the
primary database.
To refresh the snapshot plexes from the original volume
1
On the OHP host, shut down the replica database, and use the following
command to unmount the snapshot volume:
# umount mount_point
2
On the OHP host, use the following command to deport the snapshot volume’s
disk group:
# vxdg deport snapvoldg
3
On the primary host, re-import the snapshot volume’s disk group using the
following command:
# vxdg import snapvoldg
Configuring off-host processing
Implemention of off-host processing solutions
428