Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Table 13-6
Cluster status messages (continued)
DescriptionStatus message
The node has not yet been assigned a role,
and is in the process of joining the cluster.
mode: enabled:
cluster active - role not set
master: mozart
state: joining
reconfig: master update
The node is configured as a slave, and is in
the process of joining the cluster.
mode: enabled:
cluster active - SLAVE
master: mozart
state: joining
The cluster is not active on this node.
mode: enabled:
cluster inactive
If the vxconfigd daemon is disabled, no cluster information is displayed.
See the vxdctl(1M) manual page.
Determining if a disk is shareable
The vxdisk utility manages VxVM disks. To use the vxdisk utility to determine
whether a disk is part of a cluster-shareable disk group, use the following
command:
# vxdisk list accessname
where accessname is the disk access name (or device name).
For example, a portion of the output from this command (for the device c4t1d0)
is shown here:
Device: c4t1d0
devicetag: c4t1d0
type: auto
clusterid: cvm2
disk: name=shdg01 id=963616090.1034.cvm2
timeout: 30
group: name=shdg id=963616065.1032.cvm2
flags: online ready autoconfig shared imported
...
477Administering cluster functionality
Administering VxVM in cluster environments