Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Table 15-1 lists the available rule definitions, and rule attributes and their default
values.
Table 15-1
Rule definitions in Storage Expert
DescriptionRule
Checks and points out failed disks and disabled controllers.vxse_dc_failures
Checks for disk group configurations in which the disk group
has become too large.
vxse_dg1
Checks for disk group configurations in which the disk group
has too many or too few disk group configuration copies,
and if the disk group has too many or too few disk group
log copies.
vxse_dg2
Checks disk group configurations to verify that the disk
group has the correct “on disk config” size.
vxse_dg3
Checks for disk groups that do not have a current version
number, and which may need to be upgraded.
vxse_dg4
Checks for disk groups in which there is only one VxVM
configured disk.
vxse_dg5
Checks for disk groups that are seen, but which are not
imported.
vxse_dg6
Checks for disks that are initialized, but are not part of any
disk group.
vxse_disk
Checks for physical disks that have more than one RAID-5
log.
vxse_disklog
Checks for large mirror volumes that do not have an
associated DRL log.
vxse_drl1
Checks for large mirror volumes that do not have DRL log
that is mirrored.
vxse_drl2
Checks that the system “hostname” in the
/etc/vx/volboot file matches the hostname that was
assigned to the system when it was booted.
vxse_host
Checks for large mirror-striped volumes that should be
striped-mirrors.
vxse_mirstripe
Checks for RAID-5 volumes that are too narrow or too wide.vxse_raid5
Using Storage Expert
Identifying configuration problems using Storage Expert
516