Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Table 15-2
Rule attributes and default attribute values (continued)
DescriptionDefault
value
AttributeRule
Volume redundancy check.
The value of 2 performs a
mirror redundancy check.
A value of 1 performs a
RAID-5 redundancy check.
The default value of 0
performs no redundancy
check.
0volume_redundancyvxse_redundancy
No user-configurable
variables.
--vxse_rootmir
Maximum percentage of
spare disks in a disk group.
Warn if the percentage of
spare disks is greater than
this.
20max_disk_spare_ratiovxse_spares
Minimum percentage of
spare disks in a disk group.
Warn if the percentage of
spare disks is less than this.
10min_disk_spare_ratio
Stripe unit size for stripe
volumes. Warn if a stripe
does not have a stripe unit
which is an integer multiple
of this value.
8k (8KB)default
_stripeunit
vxse_stripes1
Minimum number of
columns in a striped plex.
Warn if a striped volume
has fewer columns than
this.
3too_narrow_stripevxse_stripes2
Maximum number of
columns in a striped plex.
Warn if a striped volume
has more columns than this.
16too_wide_stripe
No user-configurable
variables.
--vxse_volplex
Using Storage Expert
Identifying configuration problems using Storage Expert
520