Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Table A-1
Obtaining information about objects in VxVM (continued)
DescriptionCommand
Prints single-line information about
objects in VxVM.
See “Displaying volume information”
on page 306.
Example:
# vxprint -g mydg myvol1 \
myvol2
vxprint -hrt [-g diskgroup] [object
...]
Displays information about subdisks.
See “Displaying subdisk information”
on page 250.
Example:
# vxprint -st -g mydg
vxprint -st [-g diskgroup] [subdisk
...]
Displays information about plexes.
See “Displaying plex information”
on page 261.
Example:
# vxprint -pt -g mydg
vxprint -pt [-g diskgroup] [plex ...]
Table A-2
Administering disks
DescriptionCommand
Administers disks in VxVM using a
menu-based interface.
vxdiskadm
Adds a disk specified by device name.
See “Using vxdiskadd to put a disk
under VxVM control” on page 112.
Example:
# vxdiskadd c0t1d0
vxdiskadd [devicename ...]
Using Veritas Volume Manager commands
About Veritas Volume Manager commands
550