Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

Listing the targets configured from a Host Bus Adapter or port
You can obtain information about all the targets configured from a Host Bus
Adapter. This includes the following information:
The alias name, if available.Alias
Parent HBA or port.HBA-ID
Whether the device is Online or Offline.State
The hardware address.Address
To list the targets
◆
To list all of the targets, use the following command:
# vxddladm list targets
The following is a sample output:
TgtID Alias HBA-ID State Address
-----------------------------------------------------------------
c2_p0_t0 - c2 Online 50:0A:09:80:85:84:9D:84
c3_p0_t1 - c3 Online iqn.1992-08.com.netapp:sn.84190939
To list the targets configured from a Host Bus Adapter or port
◆
You can filter based on a HBA or port, using the following command:
# vxddladm list targets [hba=hba_name|port=port_name]
For example, to obtain the targets configured from the specified HBA:
# vxddladm list targets hba=c2
TgtID Alias HBA-ID State Address
-----------------------------------------------------------------
c2_p0_t0 - c2 Online 50:0A:09:80:85:84:9D:84
Listing the devices configured from a Host Bus Adapter and
target
You can obtain information about all the devices configured from a Host Bus
Adapter. This includes the following information:
The parent target.Target-ID
Administering disks
Discovering and configuring newly added disk devices
88