Veritas Volume Manager 5.0.1 Administrator's Guide, HP-UX 11i v3, First Edition, November 2009

5
Use the vxdctl enable command to bring the array under VxVM control.
# vxdctl enable
See “Enabling discovery of new disk arrays” on page 84.
6
To verify that the array is now supported, enter the following command:
# vxddladm listjbod
The following is sample output from this command for the example array:
VID PID SerialNum CabinetNum Policy
(Cmd/PageCode/off/len) (Cmd/PageCode/off/len)
==============================================================================
SEAGATE ALL PIDs 18/-1/36/12 18/-1/10/11 Disk
SUN SESS01 18/-1/36/12 18/-1/12/11 Disk
Administering disks
Discovering and configuring newly added disk devices
94