Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

3
When you select a disk to remove for replacement, all volumes that are
affected by the operation are displayed, for example:
VxVM NOTICE V-5-2-371 The following volumes will lose mirrors
as a result of this operation:
home src
No data on these volumes will be lost.
The following volumes are in use, and will be disabled as a
result of this operation:
mkting
Any applications using these volumes will fail future
accesses. These volumes will require restoration from backup.
Are you sure you want do this? [y,n,q,?] (default: n)
To remove the disk, causing the named volumes to be disabled and data to
be lost when the disk is replaced, enter y or press Return.
To abandon removal of the disk, and back up or move the data associated
with the volumes that would otherwise be disabled, enter n or q and press
Return.
For example, to move the volume mkting to a disk other than mydg02, use the
following command.
The ! character is a special character in some shells. The following example
shows how to escape it in a bash shell.
# vxassist move mkting \!mydg02
After backing up or moving the data in the volumes, start again from step 1.
Administering disks
Removing and replacing disks
132