Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

To display the multi-pathing information on a system
◆
Use the vxdisk path command to display the relationships between the
device paths, disk access names, disk media names and disk groups on a
system as shown here:
# vxdisk path
SUBPATH DANAME DMNAME GROUP STATE
c1t0d0 c1t0d0 mydg01 mydg ENABLED
c4t0d0 c1t0d0 mydg01 mydg ENABLED
c1t1d0 c1t1d0 mydg02 mydg ENABLED
c4t1d0 c1t1d0 mydg02 mydg ENABLED
.
.
.
This shows that two paths exist to each of the two disks, mydg01 and mydg02,
and also indicates that each disk is in the ENABLED state.
Administering Dynamic Multi-Pathing
Displaying the paths to a disk
156