Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)
dev-attr = -
###path = name state type transport ctlr hwpath aportID aportWWN attr
path = c18t0d1 enabled(a) primary SCSI c18 0/3/1/0.0x50001fe1500a8f081-1 - -
path = c26t0d1 enabled(a) primary SCSI c26 0/3/1/1.0x50001fe1500a8f081-1 - -
path = c28t0d1 enabled(a) primary SCSI c28 0/3/1/1.0x50001fe1500a8f091-2 - -
path = c20t0d1 enabled(a) primary SCSI c20 0/3/1/0.0x50001fe1500a8f091-2 - -
path = c32t0d1 enabled secondary SCSI c32 0/3/1/1.0x50001fe1500a8f0d 2-4 - -
path = c24t0d1 enabled secondary SCSI c24 0/3/1/0.0x50001fe1500a8f0d 2-4 - -
path = c30t0d1 enabled secondary SCSI c30 0/3/1/1.0x50001fe1500a8f0c 2-3 - -
path = c22t0d1 enabled secondary SCSI c22 0/3/1/0.0x50001fe1500a8f0c 2-3 - -
dmpdev = c18t0d2
state = enabled
enclosure = eva4k6k0
cab-sno = 50001FE1500A8F00
asl = libvxhpalua.sl
vid = HP
pid = HSV200
array-name = EVA4K6K
array-type = ALUA
iopolicy = MinimumQ
avid = -
lun-sno = 600508B4000544050001700002C10000 udid =
HP%5FHSV200%5F50001FE1500A8F00%5F600508B4000544050001700002C10000
dev-attr = -
###path = name state type transport ctlr hwpath aportID aportWWN attr
path = c18t0d2 enabled(a) primary SCSI c18 0/3/1/0.0x50001fe1500a8f081-1 - -
path = c26t0d2 enabled(a) primary SCSI c26 0/3/1/1.0x50001fe1500a8f081-1 - -
path = c28t0d2 enabled(a) primary SCSI c28 0/3/1/1.0x50001fe1500a8f091-2 - -
path = c20t0d2 enabled(a) primary SCSI c20 0/3/1/0.0x50001fe1500a8f091-2 - -
path = c32t0d2 enabled secondary SCSI c32 0/3/1/1.0x50001fe1500a8f0d 2-4 - -
path = c24t0d2 enabled secondary SCSI c24 0/3/1/0.0x50001fe1500a8f0d 2-4 - -
path = c30t0d2 enabled secondary SCSI c30 0/3/1/1.0x50001fe1500a8f0c 2-3 - -
path = c22t0d2 enabled secondary SCSI c22 0/3/1/0.0x50001fe1500a8f0c 2-3 - - ....
....
Use the dmpnodename attribute with list dmpnode to display the DMP information
for a given DMP node. The DMP node can be specified by name or by specifying
a path name. The detailed information for the specified DMP node includes path
information for each subpath of the listed dmpnode.
The path state differentiates between a path that is disabled due to a failure and
a path that has been manually disabled for administrative purposes. A path that
Administering Dynamic Multi-Pathing
Administering DMP using vxdmpadm
162