Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

has been manually disabled using the vxdmpadm disable command is listed as
disabled(m).
# vxdmpadm list dmpnode dmpnodename=dmpnodename
For example, the following command displays the consolidated information for
the DMP node emc_clariion0_158.
# vxdmpadm list dmpnode dmpnodename=emc_clariion0_158
dmpdev = emc_clariion0_19
state = enabled
enclosure = emc_clariion0
cab-sno = APM00042102192
asl = libvxCLARiiON.so
vid = DGC
pid = CLARiiON
array-name = EMC_CLARiiON
array-type = CLR-A/P
iopolicy = MinimumQ
avid = -
lun-sno = 6006016070071100F6BF98A778EDD811
udid = DGC%5FCLARiiON%5FAPM00042102192%5F6006016070071100F6BF98A778EDD811
dev-attr = -
###path = name state type transport ctlr hwpath aportID aportWWN attr
path = c0t5006016141E03B33d1 enabled(a) primary FC fscsi0 07-08-02 B0A
PM00042102192
50:06:01:68:10:21:26:c1 -
path = c0t5006016041E03B33d1 disabled secondary FC fscsi1 08-08-02 A0
APM00042102192
50:06:01:60:10:21:26:c1 -
Displaying the members of a LUN group
The following command displays the DMP nodes that are in the same LUN group
as a specified DMP node:
# vxdmpadm getlungroup dmpnodename=c11t0d10
NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME
===============================================================
c11t0d8 ENABLED ACME 2 2 0 enc1
c11t0d9 ENABLED ACME 2 2 0 enc1
163Administering Dynamic Multi-Pathing
Administering DMP using vxdmpadm