Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

The following command lists attributes for all enclosures in a system:
# vxdmpadm listenclosure all
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE LUN_COUNT
=================================================================================
Disk Disk DISKS CONNECTED Disk 6
ANA0 ACME 508002000001d660 CONNECTED A/A 57
enc0 A3 60020f20000001a90000 CONNECTED A/P 30
Displaying information about array ports
Use the commands in this section to display information about array ports. The
information displayed for an array port includes the name of its enclosure, and
its ID and worldwide name (WWN) identifier.
To display the attributes of an array port that is accessible via a path, DMP node
or HBA controller, use one of the following commands:
# vxdmpadm getportids path=path-name
# vxdmpadm getportids dmpnodename=dmpnode-name
# vxdmpadm getportids ctlr=ctlr-name
The following form of the command displays information about all of the array
ports within the specified enclosure:
# vxdmpadm getportids enclosure=enclr-name
The following example shows information about the array port that is accessible
via DMP node c2t66d0:
# vxdmpadm getportids dmpnodename=c2t66d0
NAME ENCLR-NAME ARRAY-PORT-ID pWWN
==============================================================
c2t66d0 HDS9500V0 1A 20:00:00:E0:8B:06:5F:19
Displaying extended device attributes
Device Discovery Layer (DDL) extended attributes are attributes or flags
corresponding to a VxVM or DMP LUN or Disk and which are discovered by DDL.
These attributes identify a LUN to a specific hardware category.
The list of categories includes:
Administering Dynamic Multi-Pathing
Administering DMP using vxdmpadm
168