Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

import-id: 0.1
flags:
version: 160
local-activation: read-write
alignment: 512 (bytes)
ssb: on
detach-policy: local
copies: nconfig=default nlog=default
config: seqno=0.1183 permlen=3448 free=3428 templen=12 loglen=522
config disk c0t10d0 copy 1 len=3448 state=clean online
config disk c0t11d0 copy 1 len=3448 state=clean online
log disk c0t10d0 copy 1 len=522
log disk c0t11d0 copy 1 len=522
To verify the disk group ID and name that is associated with a specific disk (for
example, to import the disk group), use the following command:
# vxdisk -s list devicename
This command provides output that includes the following information for the
specified disk. For example, output for disk c0t12d0 as follows:
Disk: c0t12d0
type: simple
flags: online ready private autoconfig autoimport imported
diskid: 963504891.1070.bass
dgname: newdg
dgid: 963504895.1075.bass
hostid: bass
info: privoffset=128
Displaying free space in a disk group
Before you add volumes and file systems to your system, make sure that you have
enough free disk space to meet your needs.
To display free space in the system, use the following command:
# vxdg free
The following is example output:
GROUP DISK DEVICE TAG OFFSET LENGTH FLAGS
mydg mydg01 c0t10d0 c0t10d0 0 4444228 -
mydg mydg02 c0t11d0 c0t11d0 0 4443310 -
newdg newdg01 c0t12d0 c0t12d0 0 4443310 -
217Creating and administering disk groups
Displaying disk group information