Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

Listing shared disk groups
vxdg can be used to list information about shared disk groups. To display
information for all disk groups, use the following command:
# vxdg list
Example output from this command is displayed here:
NAME STATE ID
group2 enabled,shared 774575420.1170.teal
group1 enabled,shared 774222028.1090.teal
Shared disk groups are designated with the flag shared.
To display information for shared disk groups only, use the following command:
# vxdg -s list
Example output from this command is as follows:
NAME STATE ID
group2 enabled,shared 774575420.1170.teal
group1 enabled,shared 774222028.1090.teal
To display information about one specific disk group, use the following command:
# vxdg list diskgroup
The following is example output for the command vxdg list group1 on the
master:
Group: group1
dgid: 774222028.1090.teal
import-id: 32768.1749
flags: shared
version: 140
alignment: 8192 (bytes)
ssb: on
local-activation: exclusive-write
cluster-actv-modes: node0=ew node1=off
detach-policy: local
dg-fail-policy: leave
copies: nconfig=2 nlog=2
config: seqno=0.1976 permlen=1456 free=1448 templen=6 loglen=220
config disk c1t0d0 copy 1 len=1456 state=clean online
vconfig disk c1t0d0 copy 1 len=1456 state=clean onlinev
Administering cluster functionality (CVM)
Administering VxVM in cluster environments
454