Veritas Volume Manager 5.1 SP1 Administrator"s Guide (5900-1506, April 2011)

To get the iSCSI operational parameters on the initiator for a specific iSCSI target

◆

Type the following commands:

# vxddladm getiscsi target=tgt-id {all | parameter}

You can use this command to obtain all the iSCSI operational parameters.

The following is a sample output:

# vxddladm getiscsi target=c2_p2_t0

PARAMETER CURRENT DEFAULT MIN MAX

------------------------------------------------------------------------------

DataPDUInOrder yes yes no yes

DataSequenceInOrder yes yes no yes

DefaultTime2Retain 20 20 0 3600

DefaultTime2Wait 2 2 0 3600

ErrorRecoveryLevel 0 0 0 2

FirstBurstLength 65535 65535 512 16777215

InitialR2T yes yes no yes

ImmediateData yes yes no yes

MaxBurstLength 262144 262144 512 16777215

MaxConnections 1 1 1 65535

MaxOutStandingR2T 1 1 1 65535

MaxRecvDataSegmentLength 8192 8182 512 16777215

To set the iSCSI operational parameters on the initiator for a specific iSCSI target

◆

Type the following command:

# vxddladm setiscsi target=tgt-id

parameter=value

Listing all supported disk arrays

Use this procedure to obtain values for the vid and pid attributes that are used

with other forms of the vxddladm command.

To list all supported disk arrays

◆

Type the following command:

# vxddladm listsupport all

Administering disks

Discovering and configuring newly added disk devices