WBEM Management bundle, March 2013

Installing and Upgrading Products from the bundle
• Download the bundle WBEM Management, from the web http://software.hp.com/, on to
your local system and install the bundle using the following command:
# swinstall -s / WBEMMgmtBundle
Verifying Installation
• To verify if products in WBEMMgmtBundle are installed successfully, run the following command
at the HP-UX prompt:
# swverify <product name>
For ex: Use the following command to verify SysFaultMgmt product
# swverify SysFaultMgmt
If the product is installed successfully on your system, the following message is displayed:
Verification succeeded.
• If these products are not installed successfully on your system, run the following command at
the HP-UX prompt to view the log file for errors:
# grep -i error /var/adm/sw/swagent.log
Fix the error and reinstall the product.
Installing WBEM Management bundle on different platforms and operating
environment
This section describes the techniques for installing the following versions of the below mentioned
products before upgrading to WBEM Management bundle.
Table 2 Installing techniques before upgrading to WBEM Management bundle
CorequisitesPrerequisites
Operating
environmentPlatform
SysMgmtPlus (A.05.00.09.01)PHNE_40215 PHCO_40087
openssl
March 2008HP 9000 systems
PHCO_40289
PHCO_39831
FC-COMMON (B.11.31.1003)
PHNE_37799
SysMgmtPlus (A.05.00.09.01)PHNE_40215 PHCO_40087
openssl PHCO_41483
March 2008Itanium systems
PHCO_40289
PHCO_39831
FC-COMMON (B.11.31.1003)
PHNE_37799
SysMgmtPlus (A.05.00.09.01)PHNE_40215 PHCO_40087
openssl
March 2009HP 9000 systems
PHCO_40289
FC-COMMON (B.11.31.1003)
SysMgmtPlus (A.05.00.09.01)PHNE_40215 PHCO_40087
openssl PHCO_41483
March 2009Itanium systems
PHCO_40289
FC-COMMON (B.11.31.1003)
SysMgmtPlus (A.05.00.09.01) - March
2011
PHNE_40215 PHCO_40087
openssl
All other OE's
before March 2011
HP 9000 systems
4