HP Caliper 5.3 User Guide (5900-1558, February 2011)

dspec Provides metrics on the effectiveness of data speculation.
fp Provides information relating to floating-point operation density, execution
rate, and flush/trap events density.
l1dcache Provides miss rate information for the L1 data cache.
l1icache Provides miss and prefetch usage information for the L1 instruction cache.
l2cache Provides miss rate information for the L2 unified cache.
If you specify this event set and you are on an Integrity servers dual-core Itanium
2 or Itanium 9300 quad-core processor system, it is treated as if you specified
-m l2dcache,l2icache.
l2dcache Provides miss rate information for the L2 data cache for Integrity servers
dual-core Itanium 2 and Itanium 9300 quad-core processor systems.
l2icache Provides miss rate information for the L2 instruction cache for Integrity servers
dual-core Itanium 2 and Itanium 9300 quad-core processor systems.
l3cache Provides miss rate information for the L3 unified cache.
overview Provides a particular set of metrics, depending on whether you are running
on an Itanium 2, or a dual-core Itanium 2 or Itanium 9300 quad-core processor
server.
Provides these metrics for Itanium 2 Integrity servers:
• stall
• cpi
• dispersal
• l1icache
• l1dcache
• l2cache
• tlb
• fp
This is the same as specifying -m
stall,cpi,dispersal,l1icache,l1dcache,l2cache,tlb,fp
Provides these metrics for Itanium 2 dual-core and Itanium 9300 quad-core
processor Integrity servers:
• stall
• cpi
• dispersal
• l1icache
• l1dcache
• l2icache
• l2dcache
• l3cache
• tlb
• fp
This is the same as specifying -m
stall,cpi,dispersal,l1icache,l1dcache,l2icache,l2dcache,l3cache,tlb,fp
queues Provides bus request queue (BRQ) metrics that may give some insight into
possible performance problems related to the system bus.
180 Descriptions of Measurement Reports