HP CIFS Server Administrator Guide Version A.02.04.04 (5070-6710, October 2011)

If you are in security = domain, or security = ads mode, it will probably be necessary
to rejoin an HP CIFS Server to the domain once you restore your previous backup version. See
“Windows Style Domains” (page 55) and “Windows 2003 and Windows 2008 Domains” (page
69) for details on how to rejoin an HP CIFS Server to a Windows domain.
Overview:
Installation of the HP CIFS Server software includes loading the HP CIFS Server filesets using the
swinstall(1M) utility, completing the HP CIFS configuration procedures, and starting Samba using
the startsmb script.
Installing From a Software Depot File:
To install the HP CIFS Server software from a depot file, such as those downloadable from
http://www.hp.com/go/softwaredepot, enter the following at the command line:
swinstall options -s /path/filename ProductNumber
Where ProductNumber is either B8725AA for HP-UX 11i v1 and v2 or CIFS-SERVER for HP-UX
11i v3.
options is -x autoreboot=true
path must be an absolute path, it must start with /, for example,/tmp.
filename is the name of the downloaded depot file, usually a long name of the form:
B8725_AA.02.02..HP-UX_11.23...32+64.depot
An Example
For example, if you attempt to install the HP CIFS Server A.02.02 on HP-UX 11i v2 system from a
downloaded depot file, enter the command line as shown below:
swinstall -x autoreboot=true \
-s /tmp/B8725_AA.02.02_HP-UX_11.23_IA+PA.depot B8725AA
Procedures for Updating a New Version When Using CFSM
If you want to use the CIFS File System Module (CFSM) feature on HP-UX 11i v3, each time you
update to a newer version of HP CIFS Server, it requires a system reboot after the update is complete.
To avoid a system reboot, you must perform the steps described below. For detailed information
about the CFSM feature, see Chapter 11, “ CIFS File System Module Support”.
Steps Before Updating the HP CIFS Server
Use the following steps before updating the HP CIFS Server:
1. Use the umount command to unstack CFSM from any file system where it is stacked.
For example, the following command unstacks CFSM when unmounting the physical file system
mounted on /mnt:
umount /mnt
2. Use the following commands to set both cfsm and cfsmdr modules to the unused state:
kcmodule cfsmdr = unused
kcmodule cfsm = unused
Steps After Updating the HP CIFS Server
Use the following steps after the update of the HP CIFS Server is complete:
1. Use the following commands to set both cfsm and cfsmdr modules to the auto state:
kcmodule cfsmdr = auto
kcmodule cfsm = auto
20 Installing and Configuring the HP CIFS Server