HP-UX Containers (SRP) A.03.01.004 Release Notes (5992-5696, September 2012)

The swinstall command displays an error message if the installation fails. Check the

/var/adm/sw/swagent.log file for information if the installation failed.

8. Run the swverify command to ensure that the products that you selected installed correctly.

If the installation is successful, many files are displayed and a success message appears after

the verification is complete.

# swverify HP-UX-SRP

1.5.5 Removing (un-installing) HP-UX Containers product

Use the following steps to remove (un-install) HP-UX Containers product from your HP-UX 11i v3

March 2012 (or later) system:

1. Logon to the system as the root user.

2. Stop all configured containers:

# srp -stop container_name

3. Remove all configured containers:

# srp -delete container_name

4. Disable HP-UX Containers :

# srp_sys -disable

5. Remove the HP-UX-SRP bundle:

# swremove –x autoreboot=true HP-UX-SRP

NOTE: Only the HP-UX-SRP bundle will be removed from the system. All other product

bundles included in the HP-UX Containers A.03.01.004 bundle will remain on the system.

6. Use the swlist command to verify that the HP-UX-SRP bundle is removed from the system.

The swlist command will not report the components of HP-UX-SRP if they were successfully

removed from the system.

# swlist HP-UX-SRP

1.6 Upgrading to HP-UX Containers A.03.01.004

HP-UX Containers A.03.01.004 supports upgrades from HP-UX SRP A.02.02 and later. If you have

workload SRPs configured using HP-UX SRP A.02.02 and you need to continue using them, you can

migrate the workload SRPs to workload containers after the upgrade. Before you install HP-UX

Containers A.03.01.004, make sure that all configured containers are stopped.

If the system has an operating system older than HP-UX 11i, March 2012 release, you must first

update the system to March 2012 release before installing HP-UX Containers A.03.01.004.

The srp_migrate utility migrates existing HP-UX-SRP A.02.02

workload SRPs to HP-UX Containers

A.03.01 and later workload containers. The HP-UX SRP A.02.02 workload SRPs are not visible in the

HP-UX Containers A.03.01.004 environment until you run the srp_migrate utility.