HP-UX Secure Resource Partitions (SRP) A.02.01 Administrator's Guide

• SRP does not add or manage IPv6 route entries.

14.3.1.7 PRM Tag Format

Data is stored in the /etc/prmconf file by default. When SRP adds data, it indicates the start of the

data with the following tag:

#@tag-start compartment="compartment_name" template="base" service="prm"

id="instance";

SRP indicates the end of the data with the following tag:

#@tag-end;

14.3.1.8 IPFilter Tag Format

Data is stored in the /etc/opt/ipf/ipf.conf file for IPv4 addresses and in

/etc/opt/ipf/ipf6.conf for IPv6 addresses. When SRP adds data, it indicates the start of the

data with the following tag:

#@tag-start compartment="compartment_name" template="template_name"

service="ipfilter" id="instance";

SRP indicates the end of the data with the following tag:

#@tag-end;

14.3.1.9 IPSec Tag Format

IPSec stores configuration data in the IPSec database, /var/adm/ipsec/config.db. To modify

the contents of the IPSec database, you must use the ipsec_config utility.

The configuration objects (IPSec host policy, IKE policy, and authentication record) each has a name

with following format:

SRP-compartment_name-base-ipsec