HP DCE/9000 Application Development Tools for HP-UX 11i Release Note

HP DCE/9000 Version 1.8 Application Development Tools for HP-UX 11i Release Note

Compatibility Information and Installation Requirements

The section provides a brief overview of the installation process for the HP DCE Version 1.8.

Application Development Tools for HP-UX 11i and the software prerequisites and disk space

requirements that must be met before you can install the software.

Installation Requirements

The following is a brief overview of the installation process:

1. Verify that your site meets the hardware and software prerequisites described in the

following subsections.

2. Use the swcopy tool to load HP DCE/9000 (Version 1.8) Application Development Tools,

CDS Server or Security Server software from the media to the same network distribution

area that contains the HP DCE/9000 Core Services release software.

3. Use the swinstall tool to install the required products on individual systems.

Depending on which license(s) you have purchased from Hewlett-Packard, you can install the

respective ﬁlesets from distribution media.

Prerequisites

The prerequisites for installation of DCE Version 1.8 Application Development Tools for

HP-UX 11i are:

DCE-C-Tools

• HP Series 700/800 Computer

• HP-UX 11i release, including the following ﬁlesets:

✓ DCE-Core.DCE-CORE-RUN

✓ DCE-Core.DCE-CORE-SHLIB

✓ DCE-CoreTools.DCE-BPRG

The ﬁrst two ﬁlesets listed are included with the HP-UX 11i Core OS media. The last

ﬁleset is included with the HP-UX 11i Application Release media. (At HP-UX 10.20 and

previous releases, it was part of the Core OS.)