HP-UX iSCSI Software Initiator Support Guide (Edition 7)

"No response received from the target for character \n"
"login key (%s)."
The target failed to respond to or recognize, a string key. The login failed as a
result of the protocol violation.
19. ISCSI_LOG_PROTOCOL_TOO_MANY_LOGIN_EXCH LVL_ERR
"The maximum number of exchanges (%d) for a login stage has been \n"
"exceeded."
The initiator and target have performed exchanges in an attempt to successfully
complete the login phase. The number of exchanges has exceeded the HP-UX
implementation maximum indicated in the message. To prevent the possibility of an
infinite loop, the login attempt has been terminated.
20. ISCSI_LOG_PROTOCOL_BAD_TGT_NSG LVL_ERR
"The next login stage of the target (%d) is invalid with \n"
"respect to the current initiator stage (%d) as well as the next \n"
"initiator stage (%d)."
The target returned a value for the next login stage that is invalid. The login
failed as a result of the protocol violation. This information should be
presented to the target vendor for resolution.
21. ISCSI_LOG_PROTOCOL_ALLOC_KEYS_CB LVL_ERR
"Memory allocation failure of a data structure (size %d bytes) \n"
"required for a login attempt to proceed successfully."
An attempt to allocate a connection key structure has failed. The login failed as
a result. This could be a transient condition. The login can be retried by the
application. A recommendation is to monitor the statistics using the iscsiutil
tool for allocation failures. Allocation failures are typically a symptom of
insufficient memory.
22. ISCSI_LOG_PROTOCOL_BAD_CHAP_A_VAL LVL_WARN
"Invalid value (%s) for the key CHAP_A."
An invalid value was returned by the target for the CHAP negotiation key
"CHAP_A".
23. ISCSI_LOG_PROTOCOL_BAD_CHAP_I_VAL LVL_WARN
"Invalid value (%s) for the key CHAP_I."
An invalid value was returned by the target for the CHAP negotiation key
"CHAP_I".
24. ISCSI_LOG_PROTOCOL_BAD_CHAP_C_VAL LVL_WARN
"Invalid value (%s) for the key CHAP_C."
An invalid value was returned by the target for the CHAP negotiation key
"CHAP_C".
25. ISCSI_LOG_PROTOCOL_BAD_CHAP_N_VAL LVL_WARN
"Invalid value (%s) for the key CHAP_N."
An invalid value was returned by the target for the CHAP negotiation key
"CHAP_N".
26. ISCSI_LOG_PROTOCOL_BAD_CHAP_R_VAL LVL_WARN
"Invalid value (%s) for the key CHAP_R."
An invalid value was returned by the target for the CHAP negotiation key
"CHAP_R".
27. ISCSI_LOG_PROTOCOL_BAD_CHAP_AIC LVL_WARN
"Target sent an invalid key (%s) when the initiator was \n"
"waiting for CHAP_A, CHAP_I or CHAP_C key."
An invalid value was returned by the target instead of a CHAP_A, CHAP_I or CHAP_C
key.
28. ISCSI_LOG_PROTOCOL_BAD_CHAP_NR LVL_WARN
"Target sent an invalid key (%s) when the initiator was \n"
"waiting for a CHAP_N or CHAP_R key."
An invalid value was returned by the target instead of a CHAP_N or CHAP_R key.
50 Diagnostic Messages