HP-UX iSCSI Software Initiator Support Guide, HP-UX 11i v1 and 11i v2, July 2005

Chapter 7

The iSCSI Software Interface Driver

iSCSI Software Interface Driver Configuration

Existing networking commands must be used to establish routing information and LAN configuration for

host based networking.

The user is expected to understand the Service Location Protocol (SLP) dynamic scanning technique in order

to use it. SLP is a software component separate from the iSCSI SWD. SLP is used optionally by iSCSI for

maintaining a dynamic name server (DNS) capability. See Table 2-1, “SLP Server Installation Information

and Related Documents,” on page 27, for more SLP information.