cprop_healthtest.1 (2011 09)

cprop_healthtest(1) cprop_healthtest(1)
Please refer to the description of these options as mentioned above.
-viewtest
The -viewtest command displays the results of test performed. The different
-viewtest com-
mand usages are as follows:
-viewtest
Displays the results of the basic test performed on all the instances of all the supported com-
ponents.
-viewtest -a
Displays the results of all the tests performed on all the instances of all the supported com-
ponents.
-viewtest {-j jobID}...
Displays the test results of the specified job ID.
-viewtest -c
component_name
Displays the results of the basic test performed on all the instances of the specified component.
-viewtest -c
component_name
-a
Displays the results of all the tests performed on all the instances of the specified component.
-viewtest -c component_name
-t test
Displays the results of the specified test performed on all the instances of the specified com-
ponent.
-viewtest -d component_name
:HashId
Displays the results of the basic test performed on the component’s specific instance which is
denoted by the hash ID.
-viewtest -d component_name
:HashId -a
Displays the results of all the tests performed on the component’s specific instance which is
denoted by the hash ID.
-viewtest -d component_name
:HashId -t test
Displays the results of the specified test performed on the component’s specific instance which
is denoted by the hash ID.
-viewtestlog{ -j jobID}...
Views the test log of the specified job ID.
-aborttest{ -j jobID}...
Aborts the test with the specified job ID.
-cleartestlog
The -cleartestlog command clears the log of test performed. The different -cleartestlog
command usages are as followed:
-cleartestlog
Clears the log of the basic test performed on all the instances of all the supported components
except for any that are currently running.
-cleartestlog -a
Clears the log of all the tests performed on all the instances of all the supported components
except for any that are currently running.
-cleartestlog -c component_name
Clears the log of the basic test performed on all the instances of the specified component except
for any that are currently running.
-cleartestlog -c component_name -a
Clears the log of all the tests performed on all the instances of the specified component except
for any that are currently running.
-cleartestlog -c component_name -t test
Clears the log of the specified test performed on all the instances of the specified component
except for any that are currently running.
-cleartestlog -d component_name:HashId
Clears the log of the basic test performed on a component’s specific instance except for any that
are currently running. The instance is denoted by the hash ID.
HP-UX 11i Version 3: September 2011 − 3 − Hewlett-Packard Company 3