drd_register_mirror.1m (2010 09)

d
drd_register_mirror(1M) drd_register_mirror(1M)
NAME
drd_register_mirror - notify DRD that a system image has been manually mirrored using LVM or VxVM
commands.
SYNOPSIS
drd_register_mirror
[-?] mirror_block_device_file
DESCRIPTION
The
drd_register_mirror
command notifies DRD that either the active system image or the inactive
system image has been mirrored to the mirror_block_device_file specified.
The
drd_register_mirror
command must be run after the mirror has been created.
Options
drd_register_mirror
recognizes the following options:
-? Displays the usage message.
mirror_block_device_file
The block device special file of the mirror disk. The file should refer to the entire disk, not to a
partition.
RETURN VALUE
drd_register_mirror
returns the following values:
0 Success.
1 Error.
2 Warning.
EXAMPLES
To display
drd_register_mirror
usage information:
drd_register_mirror -?
To notify DRD that all logical volumes in the root group have been mirrored to the disk
/dev/dsk/c1t2d0:
drd_register_mirror /dev/dsk/c1t2d0
To notify DRD that all logical volumes in the inactive system image have been mirrored to the disk
/dev/dsk/c2t3d0:
drd_register_mirror /dev/dsk/c2t3d0
AUTHOR
drd_register_mirror
was developed by Hewlett-Packard Development Company, L.P.
SEE ALSO
view(1), auto_parms(1M), drd-clone(1M), drd-deactivate(1M), drd-mount(1M), drd-rehost(1M), drd-
runcmd(1M), drd-status(1M), drd-sync(1M), drd-umount(1M), drd-unrehost(1M), ioscan(1M),
kcmodule(1M), kconfig(1M), kctune(1M), mk_kernel(1M), sysinfo(4), swapinfo(1M), swinstall(1M),
swlist(1M), swmodify(1M), swm-job(1M), swremove(1M), swverify(1M), update-ux(1M), vgdisplay(1M),
vxdisk(1M).
Dynamic Root Disk Administrator’s Guide, available at
http://www.hp.com/go/drd-docs
.
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1